The Huge Gates Theory

[Royell Storing]

Dissecting the Shadows
I began to try to model the shadows in the Euins clip two weeks ago, but had difficulty matching two prominent shadows in particular. These shadows appear below the center and above the two lower placards. In my animation the Martin inset has these two shadows circled in yellow.

The shadow on the right is due to the corner pilaster falling on the background. Note that the rectangular shape of the shadow tapers to point. This does not happen on a vertical surface, bricks or boxes. The east gate is anchored to the SW pilaster and is therefore only about six to eight inches from the TSBD’s west wall. There remains holes in this pilaster where the gate hardware was fixed.

The second shadow on the left side is due to the center placard and would look similar to the other placard shadows falling on the flat wall. However, this shadow is shortened to about half its expected size. This is due to falling on a sloped surface as in the lower (Google Earth) inset photo taken of that very pilaster in the Martin frame.

My animation has a simulated sloped top and provides the anomalous shadow patterns. My slope is a flat incline while the authentic slope appears to have curvature. I don’t think that could change my conclusions.

The background behind the east gate is actually the TSBD west wall. The Martin frames are soft making the brickwork essentially blended in with the mortar. Also note that nether the chain-link fence or TSBD south face breeze blocks cutouts are resolved. 

It is not just Martin’s Euins scene where bricks and mortar are unresolved and appear blended as one continuous surface. Martin and Hughes both filmed with their 8mm film cameras and recorded similar scenes of brickwork of the TSBD and DalTex buildings that do not have resolved brick/mortar. I could not find even one frame from Martin or Hughes frames showing resolved brick and mortar.   

https://i.imgur.com/a/cZ837E2.gif

   The "sloping" is because you are Not seeing the side of the TSBD. There is something staged/stacked there for loading into a truck. As Luke Mooney said in his WC Testimony, that is a Dock behind the Huge Gates with a grocery warehouse. The staging of material for loading is standard operating procedure on any dock. This makes those Huge Gates being "wide open" all the more un-explainable. You have an unattended grocery warehouse and staged material just ripe for the pickings.

[Royell Storing]

In the still from the Martin film above it looks like the gates are closed but they're not.
When the gates are wide open they rest against the interior wall. The shadows of the diamond pattern on the gates can be seen being cast against the wall.

  For starters, the image above shows the Huge Gates to be CLOSED. Proven by the following.
  On You Tube, there is a presentation titled - "Amos Euins" by - NoTrueFlags Here. From 7:21 - 7:30 it shows Amos Euins being walked down the Elm St Extension sidewalk and loaded into Inspector Sawyer's parked car in front of the TSBD. In the background, this film also shows the Huge Gates to be CLOSED. The Image above shows Officer Harkness taking Euins to be loaded into Inspector Sawyer's car. Officer Harkness made a 12:36 Police Radio Call that he was bringing Euins to the TSBD. This means these images of Euins being loaded into Inspector Sawyer's car and the CLOSED Huge Gates in the background, would be taking place between 12:37 - 12:38. Those Huge Gates were therefore closed by Officer Luke Mooney and the 2 other Officers at roughly 12:36 - 12:37. After closing the Huge Gates, Mooney and the 2 Officers then went inside the TSBD. This puts the 3 DPD Officers inside the TSBD and then on the stairwell and freight elevator at 12:38 - 12:39. This also means the TSBD POWER OUTAGE that halted the freight elevator happened at roughly 12:38 - 12:39. These are important time stamps.