The Huge Gates Theory

Author Topic: The Huge Gates Theory  (Read 3846 times)

Online Royell Storing

  • Hero Member
  • *****
  • Posts: 3676
Re: The Huge Gates Theory
« Reply #32 on: July 28, 2025, 04:30:14 PM »
Advertisement
Dissecting the Shadows
I began to try to model the shadows in the Euins clip two weeks ago, but had difficulty matching two prominent shadows in particular. These shadows appear below the center and above the two lower placards. In my animation the Martin inset has these two shadows circled in yellow.

The shadow on the right is due to the corner pilaster falling on the background. Note that the rectangular shape of the shadow tapers to point. This does not happen on a vertical surface, bricks or boxes. The east gate is anchored to the SW pilaster and is therefore only about six to eight inches from the TSBD’s west wall. There remains holes in this pilaster where the gate hardware was fixed.

The second shadow on the left side is due to the center placard and would look similar to the other placard shadows falling on the flat wall. However, this shadow is shortened to about half its expected size. This is due to falling on a sloped surface as in the lower (Google Earth) inset photo taken of that very pilaster in the Martin frame.

My animation has a simulated sloped top and provides the anomalous shadow patterns. My slope is a flat incline while the authentic slope appears to have curvature. I don’t think that could change my conclusions.

The background behind the east gate is actually the TSBD west wall. The Martin frames are soft making the brickwork essentially blended in with the mortar. Also note that nether the chain-link fence or TSBD south face breeze blocks cutouts are resolved. 

It is not just Martin’s Euins scene where bricks and mortar are unresolved and appear blended as one continuous surface. Martin and Hughes both filmed with their 8mm film cameras and recorded similar scenes of brickwork of the TSBD and DalTex buildings that do not have resolved brick/mortar. I could not find even one frame from Martin or Hughes frames showing resolved brick and mortar.   

https://i.imgur.com/a/cZ837E2.gif

   The "sloping" is because you are Not seeing the side of the TSBD. There is something staged/stacked there for loading into a truck. As Luke Mooney said in his WC Testimony, that is a Dock behind the Huge Gates with a grocery warehouse. The staging of material for loading is standard operating procedure on any dock. This makes those Huge Gates being "wide open" all the more un-explainable. You have an unattended grocery warehouse and staged material just ripe for the pickings.

JFK Assassination Forum

Re: The Huge Gates Theory
« Reply #32 on: July 28, 2025, 04:30:14 PM »