Hi Jerry, yes of course you are right and the original head ratios are indeed different. The wide-angle effect makes Oswald's head in 133-A stretch vertically as compared to the more centered head in 133-B thus exposing Trojan's gif. Btw imo this alone makes any image manipulation virtually impossible because not only do you have to match Oswald's lighting you have to match his position within the frame to allow for the appropriate image distortion.JohnM
You also don't write code I see. RGB1 is photo 1 and RGB2 is photo 2. A color is interpolated between 2 corresponding pixels according to the frame number (fn). Say you want 12 intermediary frames for your fade. Divide (RGB1 - RGB2) / 12 then multiply this increment by the frame number and add it to RGB1. This is the pixel color for your fade frame. Get it?
Yeah like I said your gif just swapped one set of RGB values for another, so what?JohnM
Wrong again. These photos were supposedly taken from the same approx. distance from the camera so they should have similar distortion. There should also be less spherical aberration near the center of the lens (the sweet spot). I don't see ANY SA in CE133-A. That 35mm Cuera 2 camera must have had a decent lens on it.
The guy [lower middle]...the official wikipedia photo of Lee Harvey Oswald...looks nothing to me like the other guys.Do the Mad Jack Mytton magic motion on these..................................
They're all Oswald, no magic required. JohnM