Users Currently Browsing This Topic:
Andrew Mason

Author Topic: 3D Modeling  (Read 23993 times)

Offline Jack Nessan

  • Hero Member
  • *****
  • Posts: 822
Re: 3D Modeling
« Reply #136 on: November 29, 2023, 03:56:09 PM »
Advertisement
   When do you show us the Woody Woodpecker cartoon?

You do understand the 3D model is interesting but in the end it is just a cartoon.

JFK Assassination Forum

Re: 3D Modeling
« Reply #136 on: November 29, 2023, 03:56:09 PM »


Offline John Mytton

  • Hero Member
  • *****
  • Posts: 4236
Re: 3D Modeling
« Reply #137 on: November 29, 2023, 04:04:26 PM »
          You guys have been so spoiled by having a THEORY rubber stamped as fact for 60 years, that you Now have no regard what-so-ever when SCIENCE reveals the Truth. And SCIENCE determining that the SBT is IMPOSSIBLE, is only the Knott Lab opening act. Plus, RFK Jr is now piling on and naming names. You LN's that NOW refuse to accept the SCIENCE are in for a very long rough ride.

Sorry to interrupt this verbal diarrhoea Royell, the Warren Commission never relied on the SBF. Oops

There is very persuasive evidence from the experts to indicate that the same bullet which pierced the President’s throat also caused Governor Connally’s wounds. However, Governor Connally’s testimony and certain other factors have given rise to some difference of opinion as to this probability, but there is no question in the mind of any member of the Commission that all the shots which caused the President’s and Governor Connally’s wounds were fired from the sixth-floor window of the Texas School Book Depository

JohnM

Online Royell Storing

  • Hero Member
  • *****
  • Posts: 2546
Re: 3D Modeling
« Reply #138 on: November 29, 2023, 04:53:37 PM »
You do understand the 3D model is interesting but in the end it is just a cartoon.

   That is certainly YOUR understanding. Limited, which explains your acceptance of the SBT. Have you seen that photo of the mock JFK Limo back seat with a couple of guys sitting there as stand-ins for JFK/Connally, and Specter holding a Pointer to replicate the trajectory of the SBT as it traveled through both men? Now, THIS is truly "cartoon" worthy. Yet, this is what you embrace. No SCIENCE there. NONE. Though it is definitely 3 Stooges worthy.     
« Last Edit: November 29, 2023, 07:26:47 PM by Royell Storing »

JFK Assassination Forum

Re: 3D Modeling
« Reply #138 on: November 29, 2023, 04:53:37 PM »


Offline Jack Nessan

  • Hero Member
  • *****
  • Posts: 822
Re: 3D Modeling
« Reply #139 on: November 30, 2023, 04:34:00 AM »
   That is certainly YOUR understanding. Limited, which explains your acceptance of the SBT. Have you seen that photo of the mock JFK Limo back seat with a couple of guys sitting there as stand-ins for JFK/Connally, and Specter holding a Pointer to replicate the trajectory of the SBT as it traveled through both men? Now, THIS is truly "cartoon" worthy. Yet, this is what you embrace. No SCIENCE there. NONE. Though it is definitely 3 Stooges worthy.   

As long as everything is oriented properly why would you need more? You just like the cartoon nature of your science? Do you relate better to the science if Woody Woodpecker and the Three Stooges are involved?

Offline Jerry Organ

  • Hero Member
  • *****
  • Posts: 2261
Re: 3D Modeling
« Reply #140 on: February 15, 2024, 04:23:24 PM »


The amount of light tone in the sun-struck version varied depending on camera and sun angles. Without a renderer program, I can't do truly reflective colors, which the visor material seems to be.

 



JFK Assassination Forum

Re: 3D Modeling
« Reply #140 on: February 15, 2024, 04:23:24 PM »


Online Andrew Mason

  • Hero Member
  • *****
  • Posts: 1198
    • SPMLaw
Re: 3D Modeling
« Reply #141 on: February 15, 2024, 05:46:39 PM »
Sorry to interrupt this verbal diarrhoea Royell, the Warren Commission never relied on the SBF. Oops

There is very persuasive evidence from the experts to indicate that the same bullet which pierced the President’s throat also caused Governor Connally’s wounds. However, Governor Connally’s testimony and certain other factors have given rise to some difference of opinion as to this probability, but there is no question in the mind of any member of the Commission that all the shots which caused the President’s and Governor Connally’s wounds were fired from the sixth-floor window of the Texas School Book Depository

JohnM
Good of you to point out this, but the fact is that they offered no alternate explanation.  In particular, they never discussed where the shot through JFK's neck went if it did not strike JBC in the back. [They also never thought to question the assumption that JBC had been hit by only one bullet.]

The conclusion of at least one member, John McCloy (and perhaps the other three that accepted the SBT) was that JBC was hit in the back by the first shot and did not notice it (despite his clear recollection that he felt the impact immediately and knew he had been hit).  This was the controversial aspect of the SBT for 15 years until the HSCA came out and suggested that the first shot missed.

Offline Steve M. Galbraith

  • Hero Member
  • *****
  • Posts: 1421
Re: 3D Modeling
« Reply #142 on: February 15, 2024, 06:06:22 PM »
Sorry to interrupt this verbal diarrhoea Royell, the Warren Commission never relied on the SBF. Oops

There is very persuasive evidence from the experts to indicate that the same bullet which pierced the President’s throat also caused Governor Connally’s wounds. However, Governor Connally’s testimony and certain other factors have given rise to some difference of opinion as to this probability, but there is no question in the mind of any member of the Commission that all the shots which caused the President’s and Governor Connally’s wounds were fired from the sixth-floor window of the Texas School Book Depository

JohnM
John: Yes, that's true but isn't it YOUR explanation? You believe in the SBT, right? And the generally accepted explanation by lone assassin believers today? It's certainly mine.

JFK Assassination Forum

Re: 3D Modeling
« Reply #142 on: February 15, 2024, 06:06:22 PM »


Online Jim Hawthorn

  • Full Member
  • ***
  • Posts: 173
Re: 3D Modeling
« Reply #143 on: February 16, 2024, 11:49:25 AM »
I've read here that there are errors in the Knott Lab. 3D diagram. Has anyone here written to the them about that?